x-rite_500_series_serial_communication_settings

This manual is intended for users who need to connect their serial device (XRite 500 series) to MeasureColor.

On newer computers that do not have a serial port available by default, use a USB-Serial adapter like the Digitus or the Keyspan USA-19HS.

Below is a list of settings that should work out-of-the-box:

(Control panel → Device Manager → COM ports):

USB-Serial adapterCOM4
Baud rate57600
Data bits8
ParityNone
Stop bits1
Flow controlXon/Xoff
LanguageEnglish
Baud rate9600 or higher
Hand shakeoff
Auto XMTOn-with Status
SeparatorComma
DelimeterCRLF
ProtocolRCI
EmulationNormal
  • x-rite_500_series_serial_communication_settings.txt
  • Last modified: 2021/04/28 13:02
  • (external edit)