In MeasureColor, all color references are managed from the Reference Manager module. The Reference Manager combines all reference functionality from the Management module and the former Color Library Manager into one convenient module.
Each time you need to create, edit, delete or simply review your color references, you only need to open the Reference Manager found on the Home screen of MeasureColor.
Note: if you don’t see the Module listed on the Home screen, check your module access rights in your UserProfile (Management Module: User groups).
While the Reference manager handles most Color references there are still condition to be set from the System management module. Here is a quick overview of all variables needed to setup a job and where to edit them:
|variable||description||Reference manager||System management or menu|
|Machines||Press properties||-||General → Machines|
|Measurement conditions||Device measurement setup||-||Conditions→Measurement conditions|
|Tolerance sets||Detailed scoring setup||-||Conditions→Tolerance sets|
|Color books||Color books with target patches||YES|
|Printing conditions||Typical print process||YES|
|Color bar||Creating and editing Color bars||-||Color bar editor (main menu)|
Starting from MeasureColor 15.3, the former PaperTypes are now called ‘Printing Conditions’. A printing condition describes a typical print process like ‘Offset Coated stock’ or Flexo Clear film’. During the job setup procedures, a printing condition is selected which helps the operator to setup his job with ease.
A color book stores one or more reference patches. These could be your default process color patches (solid, dotgain, overprint, balance, etc.) or spot color patches. Each color book can be linked to a specific Printing condition. During the job setup procedures, users select a Printing condition for their job which then limits the amount of color books shown on screen. You can also choose not to link a color book to a specific printing condition. In that case the color book will be available for any printing condition during job setup.
Color books can be filled with reference patches by either importing supported file formats (CxF3, Mif, ICC), manual creation (name, CIE-Lab, Density values) and of course by measurement.
If you need to exchange Color books between two or more MeasureColor setups it's best to use CSV export/import.
Depending on the selected patch type the shown details vary. A step-by-step guide for creating targets by measuring physical references can be found here.
To make it easier to link Color books, Printing conditions and Substrates together a Reference wizard is created. More information can be found clicking the link.
A MeasureColor substrate is a specification (material name, CIE-Lab reference) for a specific substrate like paper or film. Substrates belong to a printing condition. A printing condition (‘Coated - ISO 12647-2’, ‘Flexo clear film’, etc.) might have multiple substrates linked to it (e.g. ‘Generic gloss’, ‘Hello Silk’, ‘Clear OPP’, etc.).
When you set substrates for your printing condition, you are asked to select a substrate white patch as a reference from one of the color books so you need to create those color books and patches first.
Substrates are always linked to both a Printing condition and a Color book!
Let’s assume you wish to create a reference for a specific customer and product. The customer has all reference colors stored in a Cxf3 file which you need to use during process control or quality assessments. The product is printed in flexo, on clear film.
Please note that from MeasureColor version 16.2 this whole process can be carried out by the Reference wizard in a few easy steps.