User Tools


Measurement conditions (versions 18.1 and later)

This dialog lists all measurement conditions and enables you to add, edit and remove them.

A lot of different choices can be made to Measure color such as the M-condition, illuminant, use of filters and density standards.

A MeasureColor measurement condition is a preset that holds a combination of standards and settings regarding your measurements in one place so you can select them in a simple pulldown while setting up a job.

{{::mm_measurementconditions.png?nolink|

  1. Name
  2. Density standard (ANSI-T/DIN)
  3. Tone value method (density/spectral/SCTV)
  4. White base (absolute/paper)
  5. Select M-condition for the density measurements (Pol filter = M3)
  6. Illuminant (D50/D55/D65/D75/A/C/F2/F7/F11)
  7. Observer angle (2/10)
  8. Select M-condition for the spectral measurements

M-conditions

If you are new to M-conditions you might want to read more about those here :

m-conditions